Breadbox Gets an Updo

Breadbox Before¬† ¬†Breadbox_afterThrift Store: Goodwill¬†¬†in Lafayette , CO. ¬†Did you know Goodwill Industries “diverts more than two billion pounds of clothing and household goods every year from landfills by recovering the value in people‚Äôs unwanted material goods.” That’s pretty impressive.¬†

Breadbox appearance: decent condition, didn’t need much work.

Reality of the box condition: highly built up gunk, hardware was very worn, wood itself dry and dull, missing the center piece. 

First I had to use Scott’s Liquid Gold Cleaner & Preservative to restore the wood. This wood was highly receptive to Liquid Gold, it was a hard wood that has been around for a very long time. This also removed all the gunk the breadbox had acquired.¬†Inside the bread box

Gunk noun: unpleasant sticky or messy substance that can be removed using Liquid Gold.
Breadbox_B4_After

The Updo

Light sanding on the front in preparation for paint. A new and fun knob found at Hobby Lobby. Spray painted the hinges copper to add a shimmer. Very fancy scrapbook paper & cardboard were used to fill in the center open space for the final touch.

Breadbox is prepared for it’s date with Bread!

Breadbox Finished   Bread Loaf

Enter to win $100 Shutterfly gift card until October 28th, 2013! http://bit.ly/1hfVzXC

Don’t miss us on Facebook, Twitter, and Pinterest!

Do-It-Yourself Nesting Box

Summer is near, time to enjoy and embrace the natural world! Having a bird house or nesting box is a significant way to create a mutual relationship with nature. bird houseAs we are aware, humans have been increasingly building concrete jungle environments which in turn, is pushing out other species habitats.  By building an alternative and (nearly) natural environment for birds to nest, we are at least making an attempt to co-habitat.

pallet

pallet & pieces

Construction

Construction

Using an old pallet, a little man power, and a few power tools we built this amazing bird house! Once again, pallets are a booger to work with. We were able to get this one apart with a pry-bar and hammer, always use gloves when working with pallets! There is generally an excess of nails, most of which are rusty. After pulling off the best pieces, they were sanded (80 grit) to make the wood slightly safer to work with.

The pieces were cut according to the bird house plan used then glued and nailed appropriately.

I chose not to paint the roof, allowing Scott’s Liquid Gold Cleaner & Preservative to work its magic.

Before & After

Before & After

Nesting boxes have many positive purposes:

1. Attract natural pollinators to your garden.

2. Think wake up call – sweet chirping or obnoxious alarm clock?

3. Create a mutual relationship & co-habitat with the birds of your community. 

4. And well, birds are just fun to watch! Why do you want a bird house in your yard?

bird house

Nesting boxes generally attract birds like wrens, blue birds, chickadees, titmice, wood ducks and wood peckers. Check out choosing the right bird house for your backyard! Thanks Anthony for great instructions!

This post and project were created by our Intern, Amber Lesser. Amber is an Environmental Studies student at the University of Colorado. Thanks Amber!

Using your Resources

re¬∑source¬†noun¬†ňąrńďňĆs√īrs

“a natural feature or phenomenon that enhances the quality of human life”

wine rack collage

As we organize this spring, it helps to set an ultimate goal. What are you working so hard to¬†achieve? This could be: to de-clutter –¬†truly¬†going through papers and ‘stuff’ to file or donate, having more space – making use of wall space or¬†cabinetry, or simply cleanliness – getting every nook and¬†cranny. Whatever your goal may be, there are tons of resources at your fingertips! We’ve used a few here to create a multi-purpose organizer.

wine rack before

magazine rackBefore heading out to buy new storage or organizing containers watch for items in the garage, at your parents or grandparents house that may be of use. Especially wooden, because we love wood and there is an array of options to fix, clean and refurbish wood items. This old wine rack came from an ARES Thrift Store for $3.99.

I sanded it quite a bit, ¬†using 80 grit. I’ve recently been taught the¬†importance¬†of sanding completely before staining anything wood. It’s important to get all the way down past the previously stained parts so that the new stain will take well. I chose a white wash stain out of pure¬†curiosity. I have seen many people do it and needed to see for myself how it works and looks. ¬†I simply followed the instructions on the can and viola! We now have an elegant and rustic; wine rack,¬†towel¬†rack,¬†magazine¬†holder, or anything else you fit rack!

Of course, I followed up with a Scott’s Liquid Gold Cleaner and Preservative test! liquid gold testThis lighter wood took to Liquid Gold very well so I chose not to finish it with a clear coat.

My challenge for you, is to think outside the box to achieve your spring organizing goals. Below are some additional resources you may want to use to help you get started! towel rack with Liquid Gold

resource definition

This post and project were created by our Intern, Amber Lesser. Amber is an Environmental Studies student at the University of Colorado. Thanks Amber!

Who’s getting ready for playoffs?

If you’re hosting the parties this season – don’t break the bank to make your party festive.
Bronco table

Pick any old table from your home, garage, grandmas place or your local Goodwill. By unanimous decision, I had to pick the Bronco’s (Go Denver – cough cough!) I can’t say everyone in the building was on-board but majority rules.

Touchdown!

Touchdown!

The hardest part of re-vamping this table was making sure I did the reverse stencil properly. Simply print the imagine you’d like, cut it out and practice on a piece of cardboard. It helps to find an image in the reverse color (white to black). This may ensure you cut the right pieces out. Also, if you’re using spray paint I suggest printing on paper with one adhesive side. This will make for better lines and a simpler process (less mistakes). You could also use an adhesive spray (found at a hobby store). My table needed a little sanding first (150 grit may have been too much). necessities
Before table2

In this process I learned something about Scott’s Liquid Gold Cleaner and Preservative. At least for this wood, Liquid Gold had created a scratch resistant surface. How I found out: I had used Liquid Gold on only half of the table the week prior (before and after photos). When I began sanding the table by hand, rather than sander it was quite responsive to the sand paper on the half that did not have Liquid Gold. When I got to the other half which had Liquid Gold, the sand paper hardly touched the table – I was in awe. After cleaning one half of the table with Liquid Gold, it had moisturized it enough to become scratch-resistant. I did eventually sand that half of the table, but my arm was very tired!

Enjoy the rest of regular season and Happy Holidays from everyone at Scott’s Liquid Gold!

This post and project were created by our Intern, Amber Lesser. Amber is an Environmental Studies student at the University of Colorado. Thanks Amber!

From Nothing to Something!

A Do-It-Yourself log cabin style coat rack – made from a pallet!

Pallet

The Beginning!

Reusing old items is not always appealing, but re-purposing them can be very enjoyable and rewarding! I gathered some random materials around the office and home; a pallet, planters, random metals objects (hooks), and a few tools to create my very own cozy coat rack.

There is no doubt about it, pallets are not the easiest to work with but after some demolition work, I began sanding away. To create an even greater rustic look I used an old bike chain and hammer to dent the wood more. Then, I used a damp cloth to clean off the excess dirt and wiped it down with Scott’s Liquid Gold Wood Wash.

Rack in Progress

Making it Happen

Soon, I had a great product to begin staining. While letting the stain set in, I painted the little random objects to use as hooks and baskets. I gathered some nuts and bolts to tighten the pallet and attached the other materials (wood glue and clamps would have worked as well).

Once the rack was dry, it was quite dull so I used Scott’s Liquid Gold Wood Cleaner and Preservative to moisturize and shine my new coat rack and old pallet.

Job 1

The Finished Beauty!

If you want to start a project like this, make sure to look around your house you may be quite surprised at what you find! This fun project is a great way to spruce up your house while keeping those extra ‘things’ out of landfills.

This post and project were created by our Intern, Amber Lesser.  Amber is an Environmental Studies student at the University of Colorado.  Thanks Amber!